Design and Construction a batch ball mill for preparation of Y134 superconDesign and Construction a Batch Ball Mill for Preparation of Y134 Superconductorductor
Abstract
The purpose of this research is to design and construct the batch ball milling for Y134 superconductor preparation by wet and dry ball milling. We found that the best condition is a milling speed of 900 rpm. With volume of 800 cm3 and alumina ball diameter of 5 mm. The Y134 superconductor was synthesized by solid state reaction using Y2O3, BaCO3 and CuO as staring materials. The isopropyl alcohol was used as a media in wet ball milling process. The wet ball milling process provided of the sample with smller grain size and higher critical temperature than sample of dry ball milling. The wet and dry ball milling processes provided samples with less porosity compared with the samples prepared from grinding by mortar. Keywords : ball milling, Y134 superconductor, solid state reactionReferences
Chainok, P.,Supphadate, Su., Nilkkamjon, T., Ratreng, S., Somsri, K., Phomphuang, N., Mychareon, P. & Udomsamuthirun, P. (2014).The synthesis of YBa3Cu4Ox superconductor and comparison with YBa2Cu3Ox . Advanced Materials Research ,979, 220-223.
Hannachi, E., Hamrita, A., Slimani, Y., Ben Salem, M.K., Zouaoui, M., Ben Salem, M. & Ben Azzouz, F. (2015). Effect of the Ball-Milling Technique on the Transport Current Density of Polycrystalline Superconductor YBa2Cu3Oy- Pinning Mechanism. Journal of Superconductivity, 28, 493-498.
Kruaehong,T.(2007). Preparation and Characterization on Y-BaCuO Superconductors. Srinakharinwirot Science Journal, 23(2),15-27. (in Thai)
Kruaehong,T.(2013). A Century of Superconductors.The Journal of KMUTNB,23(2),525-542.(in thai)
Nilkamjon,T., Supadanaison, R., Panklang, T., Kumtha, P., Inlek, N., Ouengmongkhonchai, T. & Udomsamuthirun, P. et al.(2017). The Effect of Wet and Dry Ball Milling on some Properties of Y134 Superconductor.
The 3rd International Conference on Applied Physics and Material Applications (ICAPMA2017),
(67-69).Thailand.
Sayinthawong,K.(2008).Grinding or Milling. Retrieved August 5, 2008, from www.thaiceramicsociety.com/ pc_pre_grindmore.php. (in Thai)
Sukma,D., Hongsachat, P., Chaninphum, A. & Rodphon, C.(2011). Designing and Constructing Batch Ball Mill Machine Size 6 Liter. IE Network Conference 2011, (20-21). Thailand. (in Thai)
Supadanaison,R., Panklang, T., Wanichayanan, C., Kaewkao, A., Nilkamjon, T., Udomsamuthirun, P., Tiyasri, S., Wongphakdee, W. & Kruaehong, T.(2018). Determination of Cu2+ and Cu3+ by Titration in Y134 and Y145 superconductor. Materialstoday:Proceedings, 2018(5), 14896-14900.
Udomsamuthirun,P., Kruaehong, T., Nilkamjon, T. & Ratreng, S.(2010). The New Superconductors of YBaCuO Materials. Journal of Superconductivity and Novel Magnetism, 23,1377-1380.
Udomsamuthirun, P.(2016). fundamental superconductor. Bangkok: Chulalongkorn University Press. (in thai)
Hannachi, E., Hamrita, A., Slimani, Y., Ben Salem, M.K., Zouaoui, M., Ben Salem, M. & Ben Azzouz, F. (2015). Effect of the Ball-Milling Technique on the Transport Current Density of Polycrystalline Superconductor YBa2Cu3Oy- Pinning Mechanism. Journal of Superconductivity, 28, 493-498.
Kruaehong,T.(2007). Preparation and Characterization on Y-BaCuO Superconductors. Srinakharinwirot Science Journal, 23(2),15-27. (in Thai)
Kruaehong,T.(2013). A Century of Superconductors.The Journal of KMUTNB,23(2),525-542.(in thai)
Nilkamjon,T., Supadanaison, R., Panklang, T., Kumtha, P., Inlek, N., Ouengmongkhonchai, T. & Udomsamuthirun, P. et al.(2017). The Effect of Wet and Dry Ball Milling on some Properties of Y134 Superconductor.
The 3rd International Conference on Applied Physics and Material Applications (ICAPMA2017),
(67-69).Thailand.
Sayinthawong,K.(2008).Grinding or Milling. Retrieved August 5, 2008, from www.thaiceramicsociety.com/ pc_pre_grindmore.php. (in Thai)
Sukma,D., Hongsachat, P., Chaninphum, A. & Rodphon, C.(2011). Designing and Constructing Batch Ball Mill Machine Size 6 Liter. IE Network Conference 2011, (20-21). Thailand. (in Thai)
Supadanaison,R., Panklang, T., Wanichayanan, C., Kaewkao, A., Nilkamjon, T., Udomsamuthirun, P., Tiyasri, S., Wongphakdee, W. & Kruaehong, T.(2018). Determination of Cu2+ and Cu3+ by Titration in Y134 and Y145 superconductor. Materialstoday:Proceedings, 2018(5), 14896-14900.
Udomsamuthirun,P., Kruaehong, T., Nilkamjon, T. & Ratreng, S.(2010). The New Superconductors of YBaCuO Materials. Journal of Superconductivity and Novel Magnetism, 23,1377-1380.
Udomsamuthirun, P.(2016). fundamental superconductor. Bangkok: Chulalongkorn University Press. (in thai)
Downloads
Published
2018-06-22
Issue
Section
Research Article
